• Torque Solution Turbo Inlet Hose Black (Recirc): 02-07 WRX / 04-20 STI / 05-09 Legacy GT (3in Inlet)
  • Torque Solution Turbo Inlet Hose Black (Recirc): 02-07 WRX / 04-20 STI / 05-09 Legacy GT (3in Inlet)
  • Torque Solution Turbo Inlet Hose Black (Recirc): 02-07 WRX / 04-20 STI / 05-09 Legacy GT (3in Inlet)
  • Torque Solution Turbo Inlet Hose Black (Recirc): 02-07 WRX / 04-20 STI / 05-09 Legacy GT (3in Inlet)
1 4

Torque Solution

Torque Solution Turbo Inlet Hose Black (Recirc): 02-07 WRX / 04-20 STI / 05-09 Legacy GT (3in Inlet)

Torque Solution Turbo Inlet Hose Black (Recirc): 02-07 WRX / 04-20 STI / 05-09 Legacy GT (3in Inlet)

$ 211.17
$ 232.29 $ 211.17
Free shipping on orders over $99 (contiguous U.S.) — flat $10.99 under $99. Shipping details
✓ In Stock • Only 2 left

Torque Solution Turbo Inlet Hose for the Subaru EJ Engines w/ 3" Inlet Turbo. Our silicone inlet hose is much larger in size and smooths the air entering the turbo compared to the restrictive OEM corrugated inlet hose. Our inlet hose is made from 4 ply high grade silicone and wire reinforced to prevent collapsing under high pressure. We include 2 black anodized billet aluminum joiners to connect to either 2.75" or 3" intakes.

  • Smooths Airflow Entering Turbo
  • Increases Air Flow
  • Eliminates failure prone corrugated rubber hose
  • 4 Ply Silicone w/ Wire Reinforcement
  • Includes Silicone Friendly Stainless Steel Hose Clamps
  • Direct Fitment for Aftermarket 3" (76mm) Inlet Turbo's
  • Recirculated BOV Inlet
  • Limited Lifetime Warranty

Includes:

  • 3" Recirc Black Silicone Turbo Inlet Hose (1)
  • 3" Billet Aluminum Coupler (for 3" Intakes) (1)
  • 3" to 2.75" Billet Aluminum Reducer Coupler (for 2.75" Intakes) (1)
  • 1.25" Aluminum BOV Recirc Adapter
  • 70-90mm Silicone Safe Worm Gear Clamp (2)
  • 30-45mm Silicone Safe Worm Gear Clamp (1)
  • 3/8" 90 Degree Nylon Elbows (3)
  • 1/2" to 3/8" 90 Degree Nylon Reducer Elbows (2)
  • 1/2" to 3/8" Straight Nylon Reducer (2)
  • 5/16" to 3/8" Straight Nylon Reducer (2)
  • 1/2" Nylon T Fitting (1)
  • 1/2" Fuel/PCV Hose (13")
  • 1/8 NPT Stainless Plugs (4) (for DIY TGV Conversion)
  • Heavy Duty 10 Inch Zip Ties (5)
  • *We recommend either using billet TGV Conversions or using the supplied 1/8 NPT plugs to convert the factory TGV for clearance.
  • **Important note: The Torque Solution inlet bypasses the PCV Diagnosis Port. You will need to perform a simple bypass.

1. Locate PCV Diagnosis connector (grey or white depending on year), which located on the block next to throttle body.

2. You will need to use a pair of needle nose pliers to remove the jumper pin inside the PCV Diagnosis connector. This pin should pull out easily only using slight pressure. Do not discard the jumper pin removed from the connector.

3. Place the jumper pin into the female harness plug that was connected to PCV diagnosis connector. Use electrical tape to secure in place.

Vehicle Fitment

  • 2004-2013 Subaru Forester
  • 2002-2014 Subaru Impreza
  • 2005-2009 Subaru Legacy
  • 2015-2020 Subaru WRX STI

Please verify exact fitment for your trim and engine before ordering.

Manufacturer Part Number: TS-SU-565-R

Images are for illustrative purposes only. Actual product may vary.

⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Manufacturer's Warranty — Torque Solution

Torque Solution offers a Limited Lifetime Warranty, but only on parts Torque Solution manufactures and only on items that are not wear-and-tear parts. Torque Solution names urethane (polyurethane), rod ends, bearings, pulleys and coil packs as wear items its warranty does not cover — so urethane bushings, inserts and endlinks are treated as consumables even where a listing shows a lifetime bullet, and Torque Solution recommends routine inspection. Thermal blankets are covered for one (1) year against manufacturing defects, while exhaust wrap carries no warranty at all because of how it is installed and used. A few electronic parts — Fast Response IAT sensors and PNP speed-density adapter harnesses — state a 1-year term on their own product listings; Torque Solution asks you to confirm on the individual product page that the part carries a warranty before filing. Claims are filed by the original purchaser with proof of purchase, a clear description of the fault and detailed photos; if approved Torque Solution repairs or replaces the part rather than refunding it, and shipping both to and from Torque Solution is the customer's responsibility. Coverage is voided by improper installation, exposure to an exhaust leak, saturation by fluids such as oil, coolant or fuel, or use beyond the part's listed specifications. Also excluded: anodizing (UV, heat and chemical detergents), environmental corrosion, damage to or from related vehicle components, and installation, removal or vehicle-downtime costs. Noise, vibration and harshness after fitting stiffer or solid components is expected and is not a valid warranty or return issue. Fitment is based on USDM vehicles unless noted — cross-compatibility with non-USDM cars is not confirmed — and Torque Solution products are intended for off-road / race use only, with none of them CARB legal. Torque Solution's own returns and exchanges window is 30 days from the receiving date on new, unused items, with shipping both ways covered by the purchaser.

Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by Torque Solution. Contact us if you need help with a warranty claim.

View full details

Q&A

0 answered questions

No questions yet. Be the first to ask!