Torque Solution
Torque Solution Rear Differential Inserts: Subaru WRX / STi 2008+
Torque Solution Rear Differential Inserts: Subaru WRX / STi 2008+
Couldn't load pickup availability
Torque Solution Polyurethane bushings are much harder compared to the OEM units.
By replacing them with these harder Polyurethane units you are able to
get rid of the unwanted slop and flexing of the stock units which allows
for the power to go into rotating the tires, instead of flexing the
rubber. Giving you better feedback, sharper response, more
predictability on throttle input, along with eliminating annoying
clunking during hard shifts.
- Eliminates the " CLUNK " when shifting hard
- Reduces wheel hop / traction loss
- Improved 60fts / e.t's
- 1000HP+ and 8sec e.t. torture tested
- 75A durometer bushings
- Limited Lifetime Warranty
Installation:
- The top 2 inserts along with the plates install in the 2 upper subframe differential mounting points filling the voids.
- The 2nd pair of inserts install on the driver side only of the lower differential brace filling the only side that has a void in the rubber bushing.
Install Tip: Use a lithium based or silicone grease to help install the inserts into the voids.
Fits:
SUBARU FORESTER SH MY09-13 INCL TURBO9/2008-8/2013SUBARU FORESTER SJ MY14 INCL TURBO9/2013-ON
SUBARU IMPREZA GE SEDAN MY08-11 EXCL WRX & STI9/2007-8/2011
SUBARU IMPREZA GJ SEDAN MY12-14 EXCL WRX & STI9/2011-3/2014
SUBARU IMPREZA GH HATCH MY08-11 EXCL WRX & STI9/2007-8/2011
SUBARU IMPREZA GP HATCH MY12-14 EXCL WRX & STI9/2011-3/2014
SUBARU IMPREZA WRX GR, GV SEDAN MY08-119/2007-8/2011
SUBARU IMPREZA WRX GJ SEDAN MY12-149/2011-3/2014
SUBARU IMPREZA WRX GR, GV HATCH MY08-119/2007-8/2011
SUBARU IMPREZA WRX GP HATCH MY12-149/2011-8/2014
SUBARU IMPREZA STI GJ, GP MY12-149/2011-2/2014
Vehicle Fitment
- 2008-2014 Subaru Impreza
- 2015-2017 Subaru WRX STI
Please verify exact fitment for your trim and engine before ordering.
Manufacturer Part Number: TS-SU-092
Images are for illustrative purposes only. Actual product may vary.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — Torque Solution
▾
Manufacturer's Warranty — Torque Solution
Torque Solution offers a Limited Lifetime Warranty, but only on parts Torque Solution manufactures and only on items that are not wear-and-tear parts. Torque Solution names urethane (polyurethane), rod ends, bearings, pulleys and coil packs as wear items its warranty does not cover — so urethane bushings, inserts and endlinks are treated as consumables even where a listing shows a lifetime bullet, and Torque Solution recommends routine inspection. Thermal blankets are covered for one (1) year against manufacturing defects, while exhaust wrap carries no warranty at all because of how it is installed and used. A few electronic parts — Fast Response IAT sensors and PNP speed-density adapter harnesses — state a 1-year term on their own product listings; Torque Solution asks you to confirm on the individual product page that the part carries a warranty before filing. Claims are filed by the original purchaser with proof of purchase, a clear description of the fault and detailed photos; if approved Torque Solution repairs or replaces the part rather than refunding it, and shipping both to and from Torque Solution is the customer's responsibility. Coverage is voided by improper installation, exposure to an exhaust leak, saturation by fluids such as oil, coolant or fuel, or use beyond the part's listed specifications. Also excluded: anodizing (UV, heat and chemical detergents), environmental corrosion, damage to or from related vehicle components, and installation, removal or vehicle-downtime costs. Noise, vibration and harshness after fitting stiffer or solid components is expected and is not a valid warranty or return issue. Fitment is based on USDM vehicles unless noted — cross-compatibility with non-USDM cars is not confirmed — and Torque Solution products are intended for off-road / race use only, with none of them CARB legal. Torque Solution's own returns and exchanges window is 30 days from the receiving date on new, unused items, with shipping both ways covered by the purchaser.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by Torque Solution. Contact us if you need help with a warranty claim.

Q&A
No questions yet. Be the first to ask!