Torque Solution
Torque Solution Mitsubishi Evo X Billet Aluminum Fuel Rail - Red
Torque Solution Mitsubishi Evo X Billet Aluminum Fuel Rail - Red
Couldn't load pickup availability
Torque Solution Fuel Rails are a must have for high horsepower applications and a perfect complement to your high flow fuel injectors. Our rails are made from 6061 Billet Aluminum with a large bore inlet/outlet for maximum fuel flow. Designed to work with factory lines and regulator. All our rails come anodized with our logo engraved into the billet to look as good as they perform. Comes with 3/8" NPT port to add a Radium Fuel Pulse Damper Part # 14-0128 (not included). Our fuel rail is compatible with the OEM fuel pressure regulator or aftermarket FPR adapters made for the EVO X rail. We include a -6an nylon braided fuel rail feed line kit, which eliminates the restrictive hard factory feed line converting to AN fittings from the firewall hard line to the fuel rail.
- 6061 Billet Aluminum
- Large bore for increased fuel flow
- Red Anodized
- Compatible with all fuel types
- Tapped for Optional 3/8" NPT Pulse Damper Port (comes plugged)
- Limited Lifetime Warranty
Includes:
- Billet Fuel Rail (1)
- Stainless Steel Return line Bracket (2)
- Black Nylon Braided Hose (2ft)
- M6-10 Zinc Hex Bolt (4)
- M6 Zinc Flat Washer (4)
- 6AN Straight Cut ORB to -6AN Flare (1)
- Locking Quick Disconnect Adapter Fitting: 5/16" SAE to -6AN Male Flare (1)
- Rubber Hose Fitting: -6AN 45 Degree (1)
- Rubber Hose Fitting: -6AN 90 Degree (1)
- 3/8" NPT Plug (1)
Vehicle Fitment
- 2008-2015 Mitsubishi Lancer
Please verify exact fitment for your trim and engine before ordering.
Manufacturer Part Number: TS-EV-485R
Images are for illustrative purposes only. Actual product may vary.
Emissions Note: This product is not CARB approved and is not legal for sale or use on pollution-controlled motor vehicles in California, or in states that have adopted California emission standards. It is intended for off-road / racing use only. It is the responsibility of the installer/end-user to ensure compliance with all applicable federal, state and local emissions regulations.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — Torque Solution
▾
Manufacturer's Warranty — Torque Solution
Torque Solution offers a Limited Lifetime Warranty, but only on parts Torque Solution manufactures and only on items that are not wear-and-tear parts. Torque Solution names urethane (polyurethane), rod ends, bearings, pulleys and coil packs as wear items its warranty does not cover — so urethane bushings, inserts and endlinks are treated as consumables even where a listing shows a lifetime bullet, and Torque Solution recommends routine inspection. Thermal blankets are covered for one (1) year against manufacturing defects, while exhaust wrap carries no warranty at all because of how it is installed and used. A few electronic parts — Fast Response IAT sensors and PNP speed-density adapter harnesses — state a 1-year term on their own product listings; Torque Solution asks you to confirm on the individual product page that the part carries a warranty before filing. Claims are filed by the original purchaser with proof of purchase, a clear description of the fault and detailed photos; if approved Torque Solution repairs or replaces the part rather than refunding it, and shipping both to and from Torque Solution is the customer's responsibility. Coverage is voided by improper installation, exposure to an exhaust leak, saturation by fluids such as oil, coolant or fuel, or use beyond the part's listed specifications. Also excluded: anodizing (UV, heat and chemical detergents), environmental corrosion, damage to or from related vehicle components, and installation, removal or vehicle-downtime costs. Noise, vibration and harshness after fitting stiffer or solid components is expected and is not a valid warranty or return issue. Fitment is based on USDM vehicles unless noted — cross-compatibility with non-USDM cars is not confirmed — and Torque Solution products are intended for off-road / race use only, with none of them CARB legal. Torque Solution's own returns and exchanges window is 30 days from the receiving date on new, unused items, with shipping both ways covered by the purchaser.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by Torque Solution. Contact us if you need help with a warranty claim.

Q&A
No questions yet. Be the first to ask!