Torque Solution
Torque Solution 97-00 Chevrolet Corvette C5 (78mm) w/ 10mm Bolts Billet Driveshaft Flex Disc - Black
Torque Solution 97-00 Chevrolet Corvette C5 (78mm) w/ 10mm Bolts Billet Driveshaft Flex Disc - Black
Couldn't load pickup availability
Torque Solution Billet Driveshaft / Torque Tube Bushing Flex Disc (Guibo) is the perfect solution when replacing the failed OEM rubber flex disc or if you just want better overall performance. OEM rubber flex discs flex and distort under load causing them to fail. The OEM design is also power robbing, as it prevents instant power transfer due to the soft rubber design. Perfect upgrade for daily drivers, higher performance vehicles, drag cars or drift cars.
- Eliminates Driveshaft Flex/Slop
- 6061 Billet Aluminum
- Black Anodized w/ Torque Solution Logo
- 78mm Center to Center w/ fitment for M10 nuts/bolts
- Limited Lifetime Warranty
Includes:
- Billet Aluminum Bushing (1)
Applications:
- Chevrolet Corvette C5 1997-2000
- 1977 - 1983 320i (E21)
- 1983 - 5/1986 528e (E28) with Manual Transmission
- 5/86 - 1988 528e (E28) with Manual or Automatic Transmission
- 1984 - 1991 318i, 318is, & 318ic (E30)
- 1984 - 1986 325e, 325es thru 04/1986 production (E30)
- 1986 - 1991 325i, 325is, 325ic (E30)
- 1987 - 1991 325ix (E30)
- 1992 - 1997 318i 318is 318ic with Automatic Transmission only (E36)
- 1996 - 1998 Z3 1.9 Liter Roadster (4 cylinder) with Automatic Transmission only
- *Check your car carefully, as this Drive Shaft Coupler / Guibo is transmission-dependent on many applications.
- *May fit other years as well. Measure your OEM Guibo bolt holes across from each other center to center hole. If it measures 78mm and uses M10 hardware then this guibo may work for you.
- *Replaces BMW OEM Part #(s): 26111225624
- *Replaces OEM GM Part #: 88894026
- 3 Series
- E21 (75-83) > 320i
- E21 (75-83) > 323i
- 3 Series
- E30 (84-91) > 318i
- E30 (84-91) > 318is
- E30 (84-91) > 325e
- E30 (84-91) > 325es
- E30 (84-91) > 325i
- E30 (84-91) > 325is
- E30 (84-91) > 325ix
- 3 Series
- E36 (92-99) > 318i M42
- E36 (92-99) > 318i M44
- E36 (92-99) > 318ic M42
- E36 (92-99) > 318ic M44
- E36 (92-99) > 318is M42
- E36 (92-99) > 318is M44
- 3 Series
- E36/5 (95-99) > 318ti M42
- E36/5 (95-99) > 318ti M44
- 5 Series
- E28 (82-88) > 524td
- E28 (82-88) > 528e
- Z Series
- E36/7 / E36/8 Z3 (96-02) > Z3 1.9
Vehicle Fitment
- 1984-1997 BMW 318i
- 1984-1997 BMW 318ic
- 1984-1997 BMW 318is
- 1977-1983 BMW 320i
- 1984-1986 BMW 325e
- 1984-1986 BMW 325es
- 1986-1991 BMW 325i
- 1987-1991 BMW 325iX
- 1986-1991 BMW 325ic
- 1986-1991 BMW 325is
- 1983-1986 BMW 528e
- 1996-1998 BMW Z3
- 1997-2000 Chevrolet Corvette
- 1988 Toyota 86
Please verify exact fitment for your trim and engine before ordering.
Manufacturer Part Number: TS-FD-787-10
Images are for illustrative purposes only. Actual product may vary.
โ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
๐ก๏ธ
Manufacturer's Warranty โ Torque Solution
โพ
Manufacturer's Warranty โ Torque Solution
Torque Solution offers a Limited Lifetime Warranty, but only on parts Torque Solution manufactures and only on items that are not wear-and-tear parts. Torque Solution names urethane (polyurethane), rod ends, bearings, pulleys and coil packs as wear items its warranty does not cover — so urethane bushings, inserts and endlinks are treated as consumables even where a listing shows a lifetime bullet, and Torque Solution recommends routine inspection. Thermal blankets are covered for one (1) year against manufacturing defects, while exhaust wrap carries no warranty at all because of how it is installed and used. A few electronic parts — Fast Response IAT sensors and PNP speed-density adapter harnesses — state a 1-year term on their own product listings; Torque Solution asks you to confirm on the individual product page that the part carries a warranty before filing. Claims are filed by the original purchaser with proof of purchase, a clear description of the fault and detailed photos; if approved Torque Solution repairs or replaces the part rather than refunding it, and shipping both to and from Torque Solution is the customer's responsibility. Coverage is voided by improper installation, exposure to an exhaust leak, saturation by fluids such as oil, coolant or fuel, or use beyond the part's listed specifications. Also excluded: anodizing (UV, heat and chemical detergents), environmental corrosion, damage to or from related vehicle components, and installation, removal or vehicle-downtime costs. Noise, vibration and harshness after fitting stiffer or solid components is expected and is not a valid warranty or return issue. Fitment is based on USDM vehicles unless noted — cross-compatibility with non-USDM cars is not confirmed — and Torque Solution products are intended for off-road / race use only, with none of them CARB legal. Torque Solution's own returns and exchanges window is 30 days from the receiving date on new, unused items, with shipping both ways covered by the purchaser.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by Torque Solution. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!