Torque Solution
Torque Solution 01-05 Subaru WRX Throttle Body Adapter - DBC to DBW Intake Manifold
Torque Solution 01-05 Subaru WRX Throttle Body Adapter - DBC to DBW Intake Manifold
Couldn't load pickup availability
Torque Solution Throttle Body Adapter for Subaru WRX 01-05 Drive By Cable to Drive By Wire Intake Manifold is the perfect addition for those wanting to run a newer or aftermarket IM on there Subaru that has a cable driven throttle body.
- CNC'd 6061 Billet Aluminum
- Clear Anodized For Added Corrosion Resistance
- O-ring Gasket for IM Side
- Provision In Spacer For Proper IAC Valve Flow
- 13mm Thick
- Limited Lifetime Warranty
Includes:
- Billet Spacer (1)
- O-ring (1)
- M6-1.0 x 55 Stainless Steel Socket Cap (4)
- M6 Stainless Steel Flat Washer (4)
Fits:
- Subaru WRX 2001-2005
- Subaru WRX STI 2001-2002
- Any Subaru model that utilizes gasket 16175AA223 and a drive by cable throttle body
- *Custom brackets will be required to assist with cable mounting for the DBC throttle body.
- *Requires simple modification to the drive by cable throttle body gasket part # 16175AA223 (not included). Simply place the gasket over the spacer and mark the 2 locations to cut the gasket for clearance of the IAC provision in the spacer.
Vehicle Fitment
- 2001-2005 Subaru Impreza WRX STI
Please verify exact fitment for your trim and engine before ordering.
Manufacturer Part Number: TS-SU-819
Images are for illustrative purposes only. Actual product may vary.
Emissions Note: This product is not CARB approved and is not legal for sale or use on pollution-controlled motor vehicles in California, or in states that have adopted California emission standards. It is intended for off-road / racing use only. It is the responsibility of the installer/end-user to ensure compliance with all applicable federal, state and local emissions regulations.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — Torque Solution
▾
Manufacturer's Warranty — Torque Solution
Torque Solution offers a Limited Lifetime Warranty, but only on parts Torque Solution manufactures and only on items that are not wear-and-tear parts. Torque Solution names urethane (polyurethane), rod ends, bearings, pulleys and coil packs as wear items its warranty does not cover — so urethane bushings, inserts and endlinks are treated as consumables even where a listing shows a lifetime bullet, and Torque Solution recommends routine inspection. Thermal blankets are covered for one (1) year against manufacturing defects, while exhaust wrap carries no warranty at all because of how it is installed and used. A few electronic parts — Fast Response IAT sensors and PNP speed-density adapter harnesses — state a 1-year term on their own product listings; Torque Solution asks you to confirm on the individual product page that the part carries a warranty before filing. Claims are filed by the original purchaser with proof of purchase, a clear description of the fault and detailed photos; if approved Torque Solution repairs or replaces the part rather than refunding it, and shipping both to and from Torque Solution is the customer's responsibility. Coverage is voided by improper installation, exposure to an exhaust leak, saturation by fluids such as oil, coolant or fuel, or use beyond the part's listed specifications. Also excluded: anodizing (UV, heat and chemical detergents), environmental corrosion, damage to or from related vehicle components, and installation, removal or vehicle-downtime costs. Noise, vibration and harshness after fitting stiffer or solid components is expected and is not a valid warranty or return issue. Fitment is based on USDM vehicles unless noted — cross-compatibility with non-USDM cars is not confirmed — and Torque Solution products are intended for off-road / race use only, with none of them CARB legal. Torque Solution's own returns and exchanges window is 30 days from the receiving date on new, unused items, with shipping both ways covered by the purchaser.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by Torque Solution. Contact us if you need help with a warranty claim.

Q&A
No questions yet. Be the first to ask!