SuperPro
SuperPro Front Camber Adjustable Roll Center & Bump Steer Correcting Ball Joint Set MK5/MK6 TRC0003
SuperPro Front Camber Adjustable Roll Center & Bump Steer Correcting Ball Joint Set MK5/MK6 TRC0003
Couldn't load pickup availability
SuperPro's Camber Adjustable Ball Joint Set unleashes significant performance left on the table at the factory. 1) Slotted base plates in the ball joint assembly add the ability to fine tune camber separately from locating/shifting the floating subframe. Whether your car simply cannot be brought into spec by relocating the subframe or you're using one of the popular subframe 'locking' kits the SuperPro TRC0003 offers additional range of adjustment on the left and right independently 2) The MK5 and MK6 cars benefit from even small amounts of additional negative camber on both initial turn-in and increased grip throughout the corner. TRC0003 can add over 0. 5 (+/-) across the front axle at stock ride height 3) Bump steer mitigation; revised dimensions and positioning aid in reducing bump steer Note : We have tested and confirmed fitment of this kit across all VW OEM brake options and many popular aftermarket kits. The repositioning of the ball joint does move it closer to the brake rotor so special attention is required if you are fitting this kit in addition to an aftermarket big brake kit.
SPR Ball Joint Kits
Vehicle Fitment
- 2006-2013 Audi A3
- 2006-2013 Audi A3 Quattro
- 2009-2017 Volkswagen CC
- 2007-2016 Volkswagen Eos
- 2006-2014 Volkswagen GTI
- 2010-2014 Volkswagen Golf
- 2012-2013 Volkswagen Golf R
- 2006-2010 Volkswagen Jetta
- 2008 Volkswagen R32
- 2006-2009 Volkswagen Rabbit
- 2009-2016 Volkswagen Tiguan
- 2017-2018 Volkswagen Tiguan Limited
Specifications
- Manufacturer Part Number: TRC0003
- Type: Ball Joint
- Shipping Dimensions: 15.3 x 7.8 x 3.9 in
- Shipping Weight: 4 lb
- EAN: 9317745750611
- Installation Time: 3 Hours
- Kit Contents: 2 Ball Joints
- Kits Required: 1
- Fitting Position: Front
- Note: Check clearance with aftermarket rotor
- Sub brand: Roll Control
- Product Note: Boost precision and control; a complete, premium upgrade. Includes: 2 Ball Joints
- Alignment: Roll Centre
- Alignment Adjustment Type: Extended
- Alignment On Car Adjustable: Yes
Manufacturer Part Number: TRC0003
Images are for illustrative purposes only. Actual product may vary.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — SuperPro
▾
Manufacturer's Warranty — SuperPro
SuperPro Suspension Bushings, Sway Bars and Suspension Arms are covered by a Lifetime Warranty against manufacturing defects, and SuperPro places no limitation on the scope of use — on-road, off-road, racetrack and competitive motorsport all remain warranty-eligible. Ball Joints, Tie Rod Ends, Duroballs and Links are covered by a 3-year / 36,000-mile / 60,000-km warranty. Cover is limited to replacement of the originally supplied SuperPro component, and SuperPro may supply a superseded version; it does not reimburse or refund warranty-eligible products, installation, alignment or related expenses. Product finish and normal wear are excluded, including surface degradation and corrosion from road salt, debris or the elements, as is damage or premature wear caused by incorrect installation or by failing to align the wheels as recommended. Removal and replacement labour and consequential damage are not covered where local law permits that limit. A claim requires proof of original purchase from an authorised reseller showing the claimant as the purchaser, and the part must have been originally supplied for the specific application listed in the SuperPro catalogue.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by SuperPro. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!