ICON
ICON 10-27 Ford F-Series Billet 1in Lowering Shackle Kit
ICON 10-27 Ford F-Series Billet 1in Lowering Shackle Kit
Couldn't load pickup availability
Fine tune the rear ride height on your 2010-2025 Ford F-150 with ICON Vehicle Dynamics’ Billet Aluminum Lowering Shackle Kit. CNC machined from 6061 aviation grade aluminum; these billet shackles offer increased strength compared to the thin steel of the stock units to better withstand the stresses of aggressive off-road use. Their increased length also lowers the rear ride height of the truck by 1”, requiring less front lift to achieve a level stance or to assist in rear ride height tuning with aftermarket leaf springs. Their gusseted design ensures proper bushing clearance to allow fitment for stock leaf springs, ICON F-150 Multi-Rate Leaf Springs, and most other aftermarket spring packs for a wide range of suspension setup options. Pre-installed, replaceable, press in OE Ford bonded bushings make for an easy install, require no periodic greasing, and offer noise free operation while still cycling full suspension travel. The shackles look as great as they perform with a satin gray an
Vehicle Fitment
- 2010–2027 Ford F-150
Please verify exact fitment for your trim and engine before ordering.
Manufacturer Part Number: 91001
Images are for illustrative purposes only. Actual product may vary.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — ICON
▾
Manufacturer's Warranty — ICON
ICON Vehicle Dynamics sets warranty by product line. Shock absorbers carry a 1-year warranty against manufacturer defects: a shock that fails within that first year of ownership must be shipped to ICON for inspection and service, and if inspection shows the failure came from neglect, damage caused by improper installation, or any reason other than normal wear and tear, the owner is responsible for all service costs including labor, parts and shipping. ICON's other components are covered by a limited lifetime warranty. Two joint products have their own terms: the ICON Delta Joint carries a five-year warranty and a defective joint is replaced only if the warranty registration was completed within 30 days of purchase (iconvehicledynamics.com/deltajointreg), while the Delta Joint Pro carries one year from the date of purchase — neither applies to a joint used with a non-ICON suspension system, and an unregistered Delta Joint is not covered. Coverage runs to the original retail purchaser who owns the vehicle the product was originally installed on and is not transferable. ICON's obligation is limited to repair or replacement at its discretion; removal, installation or re-installation, freight charges and incidental or consequential damages are expressly excluded, and items subject to wear are not considered defective when worn. Components must be installed as a complete kit as shown in ICON's current application guide — any substitution or omission of required components voids the warranty immediately. Also not covered: finish, alterations, modifications, installation contrary to ICON's instructions, finish damage that occurs during shipping, race or competition use, and police, taxi, government or commercial vehicles. Sales outside the United States and Canada are excluded.
Warranty terms are set by the manufacturer and may change. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!