Skip to product information
1 of 6

Flowmaster

Flowmaster 73-87 GMC Pre-Bent Tailpipes

Flowmaster 73-87 GMC Pre-Bent Tailpipes

Regular price $ 249.95
Regular price $ 274.95 Sale price $ 249.95
Free shipping on orders over $99 (contiguous U.S.) — flat $10.99 under $99. Shipping details
Quantity
✓ In Stock Ships from manufacturer
Ships from Flowmaster — this item ships direct from the manufacturer. It usually goes out quickly, but because it leaves their warehouse rather than ours, delivery can take a little longer than our in-stock parts.

These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit out the sides behind the rear wheels. Designed to be used with Center Inlet/Side Outlet mufflers such as part# 942547 (Super 44 Series) or 53057 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.

  • Designed for Center Inlet/Side Outlet Mufflers
  • Exits Out the Sides Behind the Rear Wheels
  • High Clearance around Rear Differential
  • Mandrel-bent for Maximum Performance
  • 16 Gauge Aluminzed Steel Tubing
  • Does Not Include Hardware
  • 3-year Limited Warranty

Vehicle Fitment

Fits 2 makes, 1973-1987 — click to view all 19 models
  • 1973-1974 Chevrolet C10 Pickup
  • 1973-1974 GMC C15/C1500 Pickup
  • 1973-1974 GMC C25/C2500 Pickup
  • 1975-1978 GMC C15
  • 1975-1978 GMC C25
  • 1975-1978 GMC K25
  • 1975-1986 Chevrolet C10
  • 1975-1986 Chevrolet C20
  • 1975-1986 Chevrolet C30
  • 1975-1986 Chevrolet K10
  • 1975-1986 Chevrolet K20
  • 1977-1986 Chevrolet K30
  • 1979-1986 GMC C1500
  • 1979-1986 GMC C2500
  • 1979-1986 GMC K2500
  • 1987 Chevrolet R10
  • 1987 Chevrolet R20
  • 1987 GMC R1500
  • 1987 GMC R2500

Please verify exact fitment for your trim and engine before ordering.

🚚 Vendor Direct Shipment: This item is not stocked in our warehouse and ships directly from the manufacturer. Please allow additional handling time before dispatch.

Manufacturer Part Number: 15803

Images are for illustrative purposes only. Actual product may vary.

⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Manufacturer's Warranty — Flowmaster

Flowmaster warranty is tiered by material and product line. Lifetime Limited Warranty — stainless steel mufflers (FlowFX series excepted), all stainless steel exhaust systems (FlowFX included), stainless steel pipes, air intake kits and oiled-type filters (cleaning kits excepted), and other stainless steel exhaust accessories (exhaust tips and racing products excepted); this runs for the life of the original vehicle the part was installed on. Three (3) years — aluminized steel mufflers, exhaust systems and pipes, all exhaust tips, other non-race exhaust accessories, and commercial-vehicle applications of aluminized or stainless products. Two (2) years — Delta Force dry air intake filter elements. One (1) year — FlowFX series mufflers, Elite Series headers, and electronic components such as Delta Boost modules. Catalytic converters sold under the Flowmaster brand are excluded from this warranty. Coverage runs from the date of original purchase, to the original purchaser only, and only while the part remains on the vehicle it was originally installed on. Header coverage does not extend to damage caused by exhaust insulating wrap and is void if the header was fitted to a new or rebuilt engine during the initial break-in period. Sound-absorbing material inside “straight-through” mufflers degrades over time; Flowmaster treats that as normal wear, not a material defect. Also excluded: interior and exterior sound levels, cosmetic issues such as coatings and material discoloration, installation on a racing vehicle, improper installation or installation contrary to Flowmaster instructions, alteration, misuse, repair, accident, collision, undercarriage road impact or debris, and willful or negligent acts. To claim, the original purchaser returns the product either to the original retailer or directly to Flowmaster — a Returned Material Authorization (RMA) number must be obtained from Flowmaster first if returning to them — with proof of purchase showing place, price, product and date. Flowmaster's remedy is exchange for the same part number or refund of the purchase price at its option; installation, labor, towing and shipping costs are not covered.

Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by Flowmaster. Contact us if you need help with a warranty claim.

View full details

Q&A

0 answered questions

No questions yet. Be the first to ask!