Fleece Performance
Fleece Performance FPE-L5P-MAP-SPR for 2017-2024 GM 2500/3500 Duramax MAP Sensor Spacer & Boost Reference Port
Fleece Performance FPE-L5P-MAP-SPR for 2017-2024 GM 2500/3500 Duramax MAP Sensor Spacer & Boost Reference Port
Couldn't load pickup availability
Genuine Fleece Performance part.
Fleece Performance MAP Sensor Spacer with Boost Reference Port for the L5P Duramax. Problem: Because of the direct placement of the MAP sensor into the intake air stream from the factory, soot buildup becomes an ongoing problem. This requires the sensor to be routinely cleaned or replaced. Solution: The Fleece Performance MAP sensor spacer moves the sensor from the direct intake air stream to reduce soot buildup over time and eliminate the need to routinely clean or replace the sensor. The spacer block also integrates a 1/8" NPT port to allow for installation of an auxiliary intake air pressure gauge.
Key Features
- Application Notes Fits 2017-2024 L5P 6.6L Duramax
Fits These Vehicles
- Fits 2017-2022 Chevrolet Silverado 2500 HD
- Fits 2017-2022 Chevrolet Silverado 3500 HD
- Fits 2017-2022 GMC Sierra 2500 HD
- Fits 2017-2022 GMC Sierra 3500 HD
This part is made for the vehicles listed above. Where an engine or engine code is named in that list, the part is made for that combination only — check your engine code against it before ordering.
Specifications
- Brand: Fleece Performance
- Manufacturer Part Number: FPE-L5P-MAP-SPR
- Item Type: Fittings
- Engine Family: Duramax
- Condition: New
- Shipping Weight: 0.4 lb
Images are for illustrative purposes. The product you receive may differ in finish or packaging from the photograph.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — Fleece Performance
▾
Manufacturer's Warranty — Fleece Performance
Fleece Performance Engineering publishes a Limited Warranty on new products for the US and Canada, and the term is set by product line rather than by one figure for the whole catalogue. PowerFlo lift pumps carry a Lifetime warranty — parts only, non-transferable, and it must be registered within 30 days of purchase at fleeceperformance.com or by the form packed with the product. Cheetah turbochargers carry 12 months, except the Cummins VGT Cheetah units (FPE-351-0712, FPE-351-1317, FPE-351-1920) which carry 24 months on units built on or after 19 November 2018 (serial 35-25744); earlier units stay on the original 12-month term. Cylinder heads carry 12 months. For anything not in that table Fleece directs you to the warranty length shown on that part's own listing. Coverage is parts only, runs to the original owner, and begins on the date of purchase by the final end user. A Return Authorization (RMA) number must be obtained from Fleece and the completed RMA returned with the product within 30 days, and all fuel-related products must be returned to Fleece before any warranty consideration. Damage or failure caused by contaminated fuel or debris in the fuel system is not covered on any fuel-system component, including injection pumps, lift pumps and sending units. Labor and installation expenses are excluded, as are normal maintenance and wear items, damage from improper installation or lack of maintenance, repairs by a service outlet that is not an Authorized Fleece Performance Engineering Dealer, use of parts that are not genuine Fleece Performance Engineering parts, accident, misuse and alteration, acts of God, and economic loss or extra expense such as towing, storage, shipping, lost time and inconvenience. Warranty concerns go to your Authorized Dealer or to Fleece Performance Engineering on 317-286-3573.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by Fleece Performance. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!