Edelbrock
Edelbrock 7106 Performer RPM Cam and Lifters Kit Ford FE 352-428
Edelbrock 7106 Performer RPM Cam and Lifters Kit Ford FE 352-428
Couldn't load pickup availability
Edelbrock part #7106 Performer RPM Camshaft is designed for Ford FE 390-428 V-8 applications. This Edelbrock cam kit produced 418 HP & 434 ft-lbs. of torque when installed with #7105 intake and #60069 cylinder heads on a 390 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts.
This product is not approved for sale or use in the State of California, or in other states that require a CARB Executive Order (E.O.) number. It is intended for use in states that do not require CARB certification.
Fitment
- Fits Ford FE engines: 332 (5.4L), 352 (5.8L), 360 (5.9L), 390 (6.4L), 406 (6.6L), 410 (6.7L), 427 (7.0L), 428 (7.0L)
Engine-specific part, not specific to one vehicle. Confirm the engine and component match before ordering.
Edelbrock warrants this part against defects in material and workmanship for one year from the date of purchase, provided it is properly installed and operated under normal conditions. Racing or competition use, marine use unless the part is listed for marine applications, modification, improper installation or maintenance, misuse and excessive wear are excluded. The remedy is repair or replacement of the part, and installation and removal costs are not covered. Claims are made through the original place of purchase or directly with Edelbrock, with proof of purchase.
Specifications
- Brand: Edelbrock
- Manufacturer Part Number: 7106
- Type: Camshafts
- Manufacturer Warranty: 1 Year Limited
- Condition: New
Images are for illustrative purposes. The product you receive may differ in finish or packaging from the photograph.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — Edelbrock
▾
Manufacturer's Warranty — Edelbrock
Edelbrock warrants its products against defects in material and workmanship for one year from the date of purchase, except where a product line carries different terms: Performer Series carburetors and Race Division parts are covered for 90 days, Thunder Series AVS carburetors for one year, remanufactured carburetors for 30 days, and E-Force superchargers for three years or 36,000 miles, whichever comes first. Use of E85 fuel voids carburetor coverage. Racing or competition use, marine use unless the part is listed for marine applications, modification, improper installation or maintenance and excessive wear are excluded, and installation and removal costs are not covered. Claims are made through the place of purchase or directly with Edelbrock with proof of purchase; Pro-Flo EFI systems, crate engines, E-Force superchargers and cylinder heads are returned directly to Edelbrock.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by Edelbrock. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!