Edelbrock
Edelbrock 28001 Manifold Big Victor II BBC with Edelbrock Profiler or Dart Big Chief Heads Dominator
Edelbrock 28001 Manifold Big Victor II BBC with Edelbrock Profiler or Dart Big Chief Heads Dominator
Couldn't load pickup availability
Edelbrock part #28001 Big Victor 2 Spread-Port intake manifold is designed for large cubic-inch or high rpm drag racing big-blocks with Edelbrock Big Victor, Dart Big Chief or Brodix Big Duke cylinder heads, this manifold has an average runner area of approximately 4.75 sq. in. The port exits have been reduced to accommodate the wide variety of intake port sizes and require port matching. The runners have a minimum corner radius of .500" from the plenum to the exit allowing the popular oval port shape to be installed. These features, combined with approximately 5% taper in runner cross-sectional area, give better top end horsepower while maintaining consistency and throttle response off the stop. All applications are equipped with a 4500 Series flange and will accept 2.25" throttle body butterflies without a spacer or modification.
Key Features
- Use Appropriate 4500-Series Carburetor
This product is not approved for sale or use in the State of California, or in other states that require a CARB Executive Order (E.O.) number. It is intended for use in states that do not require CARB certification.
Fitment
- Fits the engine or application named in the title: confirm the engine and component match before ordering
Not specific to one vehicle. Confirm the application details above before ordering.
Edelbrock warrants this part against defects in material and workmanship for 90 days from the date of purchase, provided it is properly installed and operated under normal conditions. Racing or competition use, marine use unless the part is listed for marine applications, modification, improper installation or maintenance, misuse and excessive wear are excluded. The remedy is repair or replacement of the part, and installation and removal costs are not covered. Claims are made through the original place of purchase or directly with Edelbrock, with proof of purchase.
Specifications
- Brand: Edelbrock
- Manufacturer Part Number: 28001
- Type: Intake Manifolds
- Manufacturer Warranty: 90 Days Limited
- Condition: New
Images are for illustrative purposes. The product you receive may differ in finish or packaging from the photograph.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Share
๐ก๏ธ
Manufacturer's Warranty โ Edelbrock
โพ
Manufacturer's Warranty โ Edelbrock
Edelbrock warrants its products against defects in material and workmanship for one year from the date of purchase, except where a product line carries different terms: Performer Series carburetors and Race Division parts are covered for 90 days, Thunder Series AVS carburetors for one year, remanufactured carburetors for 30 days, and E-Force superchargers for three years or 36,000 miles, whichever comes first. Use of E85 fuel voids carburetor coverage. Racing or competition use, marine use unless the part is listed for marine applications, modification, improper installation or maintenance and excessive wear are excluded, and installation and removal costs are not covered. Claims are made through the place of purchase or directly with Edelbrock with proof of purchase; Pro-Flo EFI systems, crate engines, E-Force superchargers and cylinder heads are returned directly to Edelbrock.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by Edelbrock. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!