Carli Suspension
Carli Suspension CS-FRAD-LVL-2325 Radius Arm Drop Brackets 3.5 in Lift for 2023-2026 Ford F-250 / F-350 Super Duty 4x4
Carli Suspension CS-FRAD-LVL-2325 Radius Arm Drop Brackets 3.5 in Lift for 2023-2026 Ford F-250 / F-350 Super Duty 4x4
Couldn't load pickup availability
For the 2020-2023 Super Duty, Carli provides a 2° caster shim which restores this caster and adds a touch more – but that touch more is rarely enough for proper tracking. Carli recommends its Adjustable Radius Arms, which add up to an additional 2.5° of caster (when maxed). These shims don't affect the axial position of the axle, but rotate the knuckle/upper ball joint position rearward relative to the axle's outer "c" to increase caster. Given the tight proximity of this debris shield to the axle tube, any caster shim over 1° will cause contact. These trucks come with low caster from the factory, compounded by the loss of caster from lifting the truck (radius arms tilt the axle forward – reducing caster – as the axle travels away from the frame).
Key Features
- Drops Pivot Point For Ideal Arm Angle on Carli 3.5 in Lift
- 1/4 in Steel Construction, Powder Coated Finish
- Bolt-on Installation
Fits These Vehicles
- Fits 2023-2026 Ford F-250 Super Duty
- Fits 2023-2026 Ford F-350 Super Duty
Confirm the model year, the trim and the part number against your vehicle before ordering.
4x4 / 4WD models only.
Carli Suspension warrants the products it manufactures against defects in workmanship and materials for the original purchaser with a limited lifetime warranty. Wear items such as bushings, heim joints, uniballs, airbags and limit straps are excluded, as are rust and corrosion. Alterations, modifications, improper installation, and the costs of removal, installation, freight and consequential damage are not covered.
Specifications
- Brand: Carli Suspension
- Manufacturer Part Number: CS-FRAD-LVL-2325
- Type: Radius Arm Drop Bracket
- Material: Steel
- Manufacturer Warranty: Limited Lifetime (original purchaser)
- Condition: New
Images are for illustrative purposes. The product you receive may differ in finish or packaging from the photograph.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — Carli Suspension
▾
Manufacturer's Warranty — Carli Suspension
Carli Suspension warrants the products it manufactures against defects in workmanship and materials with a limited lifetime warranty for the original purchaser, counted from the date of purchase. Parts made to Carli’s specifications by other manufacturers carry their own coverage: Carli-SPEC shocks and Carli stainless steering stabilizers are covered for 1 year from purchase and serviced by Carli; Carli Signature Series shocks carry a limited lifetime warranty serviced by Carli; King shocks are covered for 90 days from purchase and serviced by King Shocks; E-Venture shocks and electronics are covered for 1 year from purchase and serviced by Suspension Direct; Deaver leaf springs are covered for 30 days from installation against material or manufacturing defects. CS-DBJP ball joints carry the limited lifetime warranty when both the upper and lower Carli ball joints are installed. Not covered: wear items (bushings, heim joints, uniballs, airbags and limit straps); rust or corrosion; coil springs on trucks with heavier-than-stock setups such as winch bumpers or snow plows; parts that have been altered or installed incorrectly; and removal, installation, freight, incidental or consequential costs. Coverage is limited to repair or replacement of the defective part. Claims require proof of purchase from the original purchaser and are handled directly by Carli Suspension, or by King Shocks or Suspension Direct for their shocks.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by Carli Suspension. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!