Carli Suspension
Carli Suspension CS-DPAP3-19-425 Progressive Add-A-Pack Kit 2 in Lift for 2019-2025 Ram 3500 4x4
Carli Suspension CS-DPAP3-19-425 Progressive Add-A-Pack Kit 2 in Lift for 2019-2025 Ram 3500 4x4
Couldn't load pickup availability
The 5 leaf progressive add a pack rear springs replace the lower overload leaf on the factory leaf spring pack (1 in thick leaf that doesn't follow the contour of the rest of the pack) with 5 thinner gauge leaf spring designed to maintain the factory load capacity while increasing mobility of the spring. Improved traction and predictability are immediately noticeable and as is a much-improved ride off-road and when loaded. First, the rear axle was upgraded to the AAM 12 in from the 11.5 in in previous generations increasing the axle tube diameter to a whopping 4.25 in. Additional, the rear end of the truck was lowered nearly 2 in. From the factory, this give a 1 in-1.5 in rear high stance.
Key Features
- Add-A-Pack Replaces lower overload spring
- More predictability and Spring Progression Keeps Tires Planted
- 1 in block included to match Carli 3 in Suspension Systems
- 2 in-2.5 in Total lift with Add-a-Pack and Block Combination
- Includes U-Bolts and Center Pins
- Will NOT fit 2019 and newer 3500 with Factory Air-Assist
Fits These Vehicles
- Fits 2019-2025 Ram 3500
Confirm the model year, the trim and the part number against your vehicle before ordering.
4x4 / 4WD models only.
What's Included
- Rear 1 in Lift Block (Pair) (CS-DRBLK-1)
- Progressive Add-A-Pack Set (AS-DPAP-03)
- 4.25 in Rear Axle U-Bolts (CS-DUBK-19-425)
Specifications
- Brand: Carli Suspension
- Manufacturer Part Number: CS-DPAP3-19-425
- Type: Leaf Spring
- Condition: New
Images are for illustrative purposes. The product you receive may differ in finish or packaging from the photograph.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — Carli Suspension
▾
Manufacturer's Warranty — Carli Suspension
Carli Suspension warrants the products it manufactures against defects in workmanship and materials with a limited lifetime warranty for the original purchaser, counted from the date of purchase. Parts made to Carli’s specifications by other manufacturers carry their own coverage: Carli-SPEC shocks and Carli stainless steering stabilizers are covered for 1 year from purchase and serviced by Carli; Carli Signature Series shocks carry a limited lifetime warranty serviced by Carli; King shocks are covered for 90 days from purchase and serviced by King Shocks; E-Venture shocks and electronics are covered for 1 year from purchase and serviced by Suspension Direct; Deaver leaf springs are covered for 30 days from installation against material or manufacturing defects. CS-DBJP ball joints carry the limited lifetime warranty when both the upper and lower Carli ball joints are installed. Not covered: wear items (bushings, heim joints, uniballs, airbags and limit straps); rust or corrosion; coil springs on trucks with heavier-than-stock setups such as winch bumpers or snow plows; parts that have been altered or installed incorrectly; and removal, installation, freight, incidental or consequential costs. Coverage is limited to repair or replacement of the defective part. Claims require proof of purchase from the original purchaser and are handled directly by Carli Suspension, or by King Shocks or Suspension Direct for their shocks.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by Carli Suspension. Contact us if you need help with a warranty claim.

Q&A
No questions yet. Be the first to ask!