BMR Suspension
BMR 93-02 F-Body Non-Convertible Bolt-On Boxed Subframe Connectors - Red
BMR 93-02 F-Body Non-Convertible Bolt-On Boxed Subframe Connectors - Red
Couldn't load pickup availability
Reduce chassis flex and increase handling and performance on your 4th Gen GM F-body with two-point bolt-on sub-frame connectors from BMR Suspension. The F-body chassis flexes dramatically, even with mild amounts of torque and horsepower. The BMR sub-frame connectors are manufactured from 2 x 2 inch heavy-duty square steel tubing and laser-cut CNC-formed 3/16-inch steel plate. Other suspension companies use an inferior, round-tube design. BMR engineered these bolt-on sub-frame connectors to be considerably stronger than other sub-frame connectors on the market. The SFC023s connect the front and rear sub-frames, linking the front and rear of the chassis together.
BMR has designed the SFC023 for the street performance, drag race, and handling applications. This two-point design is far superior to other subframe connectors on the market. The SFC023s solidly link the front and rear subframe, where others only connect the front subframe to the lower control arm mount. This does little to keep the rear of the chassis from flexing. BMR's SFC023 sub-frame connectors are 100% bolt-on. This means they can be easily installed with simple hand tools, and no welding is required. When performance is a must, rely on BMR Suspension!
BMR Suspension's SFC023 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.
Vehicle Fitment
- 1993-2002 Chevrolet Camaro
- 1993-2002 Pontiac Firebird
Please verify exact fitment for your trim and engine before ordering.
Manufacturer Part Number: SFC023R
Images are for illustrative purposes only. Actual product may vary.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — BMR Suspension
▾
Manufacturer's Warranty — BMR Suspension
BMR Suspension warrants its products to the original purchaser against defects in materials and workmanship under normal use for two (2) years from the date of sale. BMR's obligation under this warranty is limited to replacement of the product — reinstallation and other incidental costs are not covered — and warranty claims are limited to replacement or credit for returned merchandise. The warranty does not apply to products that have been misused, neglected, altered, damaged or improperly installed, and normal wear is not considered a defect. Impact damage and damage to powder coat are specifically excluded. An RMA is required for all warranty returns; replacement product ships at no charge via UPS Ground, and upgraded shipping is available at the customer's expense for the difference in cost. BMR products are designed for use with OEM and other BMR products — BMR does not warrant fitment with aftermarket products from other manufacturers, including suspension, exhaust, drivetrain or other aftermarket components; returns due to fitment issues with OEM or BMR products receive a full refund, while returns due to fitment issues with another manufacturer's aftermarket parts are subject to a 15% restocking fee. BMR also states that racing parts and equipment are used under varied conditions, that the suitability of any part for a particular application is solely the purchaser's decision, and that BMR makes no warranties, express, implied or written, and that there is no warranty of merchantability; BMR reserves the right to change designs without obligation to modify previously manufactured units, and the buyer agrees to indemnify and hold BMR harmless from any claim arising from installation or use. Separately from warranty, non-warranty returns must be made within 90 days of shipment and carry a 15% restocking fee (shipping costs excluded): items that have been installed, used, modified or damaged are not accepted, everything must come back in its original packaging with an RMA and freight prepaid (collect shipments are refused), any scratch or damage is deducted at the cost to repair or re-powder coat, missing components are deducted at replacement cost, and special order items cannot be returned.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by BMR Suspension. Contact us if you need help with a warranty claim.

Q&A
No questions yet. Be the first to ask!