BMR Suspension
BMR 82-02 3rd Gen F-Body Chrome Moly Adj. Xtreme Torque Arm Kit - Red
BMR 82-02 3rd Gen F-Body Chrome Moly Adj. Xtreme Torque Arm Kit - Red
Couldn't load pickup availability
Improve handling, reduce wheel hop, and add strength and adjustability to your 3rd or 4th-Gen GM F-body with an adjustable Xtreme Torque Arm from BMR Suspension. The factory stamped steel torque arm deflects tremendously, even with mild amounts of horsepower and torque. Manufactured from lightweight 1.25-inch Chromoly steel tubing and heavy-duty 3/8-inch, laser cut, CNC-formed steel plate, BMR's Xtreme Torque Arm adds strength and adjustability over the weak factory torque arm. The front mount utilizes 1 5/8-inch cross tube that welds to the frame rails. A 95-duromter polyurethane bushing is used for long, quiet, and trouble free operation. The torque arm uses the rear factory mounting locations with heavy-duty rod ends. Pinion angle is adjustable using a heavy-duty CNC machined 4130 Chrome-moly adjuster.
BMR Suspension designed the XTA001 for street performance and drag race applications. The heavy-duty design eliminated torque arm deflection, allowing power to transfer more efficiently to the tires. The torque arm allows for on-car pinion angle adjustability. The heavy-duty Chrome-moly adjuster in the torque arm allows for on-car fine-tuning of pinion angle. The torque arm mounts in the factory mount with a 95-durometer polyurethane bushing. This transfers power efficiently, without huge increases in NVH.
Torque arm hardware kit RH001 (Highly Recommended) also available.
BMR Suspension adjustable Xtreme Torque Arm is available in black hammertone and red powdercoat. Installation time is 3-4 hours. Proudly made in the U.S.A.
Vehicle Fitment
- 1982-2002 Chevrolet Camaro
- 1982-2002 Pontiac Firebird
Please verify exact fitment for your trim and engine before ordering.
Manufacturer Part Number: XTA001R
Images are for illustrative purposes only. Actual product may vary.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — BMR Suspension
▾
Manufacturer's Warranty — BMR Suspension
BMR Suspension warrants its products to the original purchaser against defects in materials and workmanship under normal use for two (2) years from the date of sale. BMR's obligation under this warranty is limited to replacement of the product — reinstallation and other incidental costs are not covered — and warranty claims are limited to replacement or credit for returned merchandise. The warranty does not apply to products that have been misused, neglected, altered, damaged or improperly installed, and normal wear is not considered a defect. Impact damage and damage to powder coat are specifically excluded. An RMA is required for all warranty returns; replacement product ships at no charge via UPS Ground, and upgraded shipping is available at the customer's expense for the difference in cost. BMR products are designed for use with OEM and other BMR products — BMR does not warrant fitment with aftermarket products from other manufacturers, including suspension, exhaust, drivetrain or other aftermarket components; returns due to fitment issues with OEM or BMR products receive a full refund, while returns due to fitment issues with another manufacturer's aftermarket parts are subject to a 15% restocking fee. BMR also states that racing parts and equipment are used under varied conditions, that the suitability of any part for a particular application is solely the purchaser's decision, and that BMR makes no warranties, express, implied or written, and that there is no warranty of merchantability; BMR reserves the right to change designs without obligation to modify previously manufactured units, and the buyer agrees to indemnify and hold BMR harmless from any claim arising from installation or use. Separately from warranty, non-warranty returns must be made within 90 days of shipment and carry a 15% restocking fee (shipping costs excluded): items that have been installed, used, modified or damaged are not accepted, everything must come back in its original packaging with an RMA and freight prepaid (collect shipments are refused), any scratch or damage is deducted at the cost to repair or re-powder coat, missing components are deducted at replacement cost, and special order items cannot be returned.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by BMR Suspension. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!