BMR Suspension
BMR 79-93 Fox Mustang Lower A-Arms (Coilover Only) w/ Adj. Rod End and STD. Ball Joint - Red
BMR 79-93 Fox Mustang Lower A-Arms (Coilover Only) w/ Adj. Rod End and STD. Ball Joint - Red
Couldn't load pickup availability
A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR's AA036 Lower A-arms are equipped with heavy-duty, Teflon-lined rod ends. BMR's heavy-duty rod ends are designed to solidly link the A-arms to the body, eliminating deflection. Our rod ends will stand up to high loads of any performance environment, offering all of the bind-free suspension articulation needed for great handling.
BMR's AA036 lower A-arms eliminate deflection, greatly improving steering feel and response in normal and performance driving situations. The rod ends add strength and reduce deflection over the stock rubber bushing. The means you get the maximum amount of performance. The AA036 lower A-arms are designed to work with coilover shocks. This gives you the ability for a wide range of ride height adjustability. Designed for street performance, drag race, and handling applications, BMR lower A-arms are engineered to give you improved geometry and increased lateral grip during cornering situations.
BMR Suspension AA036 Adjustable Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.
Vehicle Fitment
- 1979-1993 Ford Mustang
Please verify exact fitment for your trim and engine before ordering.
Manufacturer Part Number: AA036R
Images are for illustrative purposes only. Actual product may vary.
โ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
๐ก๏ธ
Manufacturer's Warranty โ BMR Suspension
โพ
Manufacturer's Warranty โ BMR Suspension
BMR Suspension warrants its products to the original purchaser against defects in materials and workmanship under normal use for two (2) years from the date of sale. BMR's obligation under this warranty is limited to replacement of the product — reinstallation and other incidental costs are not covered — and warranty claims are limited to replacement or credit for returned merchandise. The warranty does not apply to products that have been misused, neglected, altered, damaged or improperly installed, and normal wear is not considered a defect. Impact damage and damage to powder coat are specifically excluded. An RMA is required for all warranty returns; replacement product ships at no charge via UPS Ground, and upgraded shipping is available at the customer's expense for the difference in cost. BMR products are designed for use with OEM and other BMR products — BMR does not warrant fitment with aftermarket products from other manufacturers, including suspension, exhaust, drivetrain or other aftermarket components; returns due to fitment issues with OEM or BMR products receive a full refund, while returns due to fitment issues with another manufacturer's aftermarket parts are subject to a 15% restocking fee. BMR also states that racing parts and equipment are used under varied conditions, that the suitability of any part for a particular application is solely the purchaser's decision, and that BMR makes no warranties, express, implied or written, and that there is no warranty of merchantability; BMR reserves the right to change designs without obligation to modify previously manufactured units, and the buyer agrees to indemnify and hold BMR harmless from any claim arising from installation or use. Separately from warranty, non-warranty returns must be made within 90 days of shipment and carry a 15% restocking fee (shipping costs excluded): items that have been installed, used, modified or damaged are not accepted, everything must come back in its original packaging with an RMA and freight prepaid (collect shipments are refused), any scratch or damage is deducted at the cost to repair or re-powder coat, missing components are deducted at replacement cost, and special order items cannot be returned.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by BMR Suspension. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!