Skip to product information
1 of 3

BMR Suspension

BMR 78-87 G-Body Front & Rear Sway Bar Kit w/ Bushings - Red

BMR 78-87 G-Body Front & Rear Sway Bar Kit w/ Bushings - Red

Regular price $ 519.95
Regular price $ 571.95 Sale price $ 519.95
Free shipping on orders over $99 (contiguous U.S.) — flat $10.99 under $99. Shipping details
Quantity
✓ Available to Order
Ships from BMR Suspension — this item ships direct from the manufacturer. It usually goes out quickly, but because it leaves their warehouse rather than ours, delivery can take a little longer than our in-stock parts.

Reduce body roll and improve the handling of your 1978-1987 G-Body with a Sway Bar Kit from BMR Suspension! Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR’s Sway Bar Kit (SB031) increases sway bar rate and is designed for street performance, autocross, and road racing applications. When performance is a must, rely on BMR Suspension!

  • Fits 1978-1987 GM G-Bodies
  • Includes SB020 (Front) and SB021 (Rear)
  • Manufactured from 1.25-inch (Front) solid steel tubing and 1-inch (Rear) DOM steel tubing
  • Greaseable 88-durometer polyurethane front bushings
  • Includes Grade 8 hardware
  • Cold-formed to better resist torsional fatigue
  • Non-adjustable front and rear bars
  • Significantly increases front and rear sway bar rates
  • Dramatically reduces body roll
  • Greater sway bar control allows for better handling of your vehicle
  • Available in red or black hammertone powder coat for long lasting good looks
  • 2-3 hour installation time
  • Proudly designed in the USA!
  • Proudly made in the USA!

Vehicle Fitment

  • 1978-1987 Buick Regal
  • 1978-1987 Chevrolet El Camino
  • 1978-1987 Chevrolet Malibu
  • 1978-1987 Chevrolet Monte Carlo
  • 1978-1987 Oldsmobile Cutlass
  • 1978-1987 Pontiac Grand Prix

Please verify exact fitment for your trim and engine before ordering.

Manufacturer Part Number: SB031R

Images are for illustrative purposes only. Actual product may vary.

⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Manufacturer's Warranty — BMR Suspension

BMR Suspension warrants its products to the original purchaser against defects in materials and workmanship under normal use for two (2) years from the date of sale. BMR's obligation under this warranty is limited to replacement of the product — reinstallation and other incidental costs are not covered — and warranty claims are limited to replacement or credit for returned merchandise. The warranty does not apply to products that have been misused, neglected, altered, damaged or improperly installed, and normal wear is not considered a defect. Impact damage and damage to powder coat are specifically excluded. An RMA is required for all warranty returns; replacement product ships at no charge via UPS Ground, and upgraded shipping is available at the customer's expense for the difference in cost. BMR products are designed for use with OEM and other BMR products — BMR does not warrant fitment with aftermarket products from other manufacturers, including suspension, exhaust, drivetrain or other aftermarket components; returns due to fitment issues with OEM or BMR products receive a full refund, while returns due to fitment issues with another manufacturer's aftermarket parts are subject to a 15% restocking fee. BMR also states that racing parts and equipment are used under varied conditions, that the suitability of any part for a particular application is solely the purchaser's decision, and that BMR makes no warranties, express, implied or written, and that there is no warranty of merchantability; BMR reserves the right to change designs without obligation to modify previously manufactured units, and the buyer agrees to indemnify and hold BMR harmless from any claim arising from installation or use. Separately from warranty, non-warranty returns must be made within 90 days of shipment and carry a 15% restocking fee (shipping costs excluded): items that have been installed, used, modified or damaged are not accepted, everything must come back in its original packaging with an RMA and freight prepaid (collect shipments are refused), any scratch or damage is deducted at the cost to repair or re-powder coat, missing components are deducted at replacement cost, and special order items cannot be returned.

Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by BMR Suspension. Contact us if you need help with a warranty claim.

View full details

Q&A

0 answered questions

No questions yet. Be the first to ask!