BMR Suspension
BMR 67-69 GM F-Body / 68-74 X-Body Non-Adj. Upper & Lower A-Arms (Polyurethane) - Red
BMR 67-69 GM F-Body / 68-74 X-Body Non-Adj. Upper & Lower A-Arms (Polyurethane) - Red
Couldn't load pickup availability
Improve handling and front-end stability on your 1967-1969 F-Body and 1968-1974 X-Body with an A-Arm Kit from BMR Suspension! Factory A-arms and bushings can cause deflection, resulting in changes in alignment and reduced performance. BMR’s A-Arm Kit (AAK311) featuring Non-Adjustable Upper (AAU311) and Lower A-Arms (AAL311) greatly improve steering feel and response and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR Suspension!
- Fits 1967-1969 GM F-Bodies
- Fits 1968-1974 GM X-Bodies
- Designed for vehicles where the bump stops are located on the front sides of the lower A-arms
- Manufactured from heavy-duty 1.25-inch, 0.095-inch wall and 1.625-inch, 0.120-inch wall DOM tubing
- Laser-cut, CNC-formed plate steel braces
- Greaseable, internally fluted Delrin bushings
- Includes new ball joints
- Preassembled with new polyurethane bump stops
- Dual-offset cross-shafts for minimizing shim stack on AAU311
- Eliminates A-arm deflection
- Non-adjustable
- Requires less shim stack for negative camber than factory arms
- Provides 4 additional degrees of positive caster
- Additional header clearance
- Improves geometry and increases lateral grip during cornering situations
- Available in red or black hammertone powder coat for long lasting good looks
- 4-5 hour installation time
- Proudly designed in the USA!
- Proudly made in the USA!
Vehicle Fitment
- 1967-1969 Chevrolet Camaro
- 1968-1974 Chevrolet Nova
- 1967-1969 Pontiac Firebird
Please verify exact fitment for your trim and engine before ordering.
Manufacturer Part Number: AAK311R
Images are for illustrative purposes only. Actual product may vary.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — BMR Suspension
▾
Manufacturer's Warranty — BMR Suspension
BMR Suspension warrants its products to the original purchaser against defects in materials and workmanship under normal use for two (2) years from the date of sale. BMR's obligation under this warranty is limited to replacement of the product — reinstallation and other incidental costs are not covered — and warranty claims are limited to replacement or credit for returned merchandise. The warranty does not apply to products that have been misused, neglected, altered, damaged or improperly installed, and normal wear is not considered a defect. Impact damage and damage to powder coat are specifically excluded. An RMA is required for all warranty returns; replacement product ships at no charge via UPS Ground, and upgraded shipping is available at the customer's expense for the difference in cost. BMR products are designed for use with OEM and other BMR products — BMR does not warrant fitment with aftermarket products from other manufacturers, including suspension, exhaust, drivetrain or other aftermarket components; returns due to fitment issues with OEM or BMR products receive a full refund, while returns due to fitment issues with another manufacturer's aftermarket parts are subject to a 15% restocking fee. BMR also states that racing parts and equipment are used under varied conditions, that the suitability of any part for a particular application is solely the purchaser's decision, and that BMR makes no warranties, express, implied or written, and that there is no warranty of merchantability; BMR reserves the right to change designs without obligation to modify previously manufactured units, and the buyer agrees to indemnify and hold BMR harmless from any claim arising from installation or use. Separately from warranty, non-warranty returns must be made within 90 days of shipment and carry a 15% restocking fee (shipping costs excluded): items that have been installed, used, modified or damaged are not accepted, everything must come back in its original packaging with an RMA and freight prepaid (collect shipments are refused), any scratch or damage is deducted at the cost to repair or re-powder coat, missing components are deducted at replacement cost, and special order items cannot be returned.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by BMR Suspension. Contact us if you need help with a warranty claim.

Q&A
No questions yet. Be the first to ask!