BMR Suspension
BMR 1964-1972 GM A-Body Rear Coilover Conversion Kit - Red
BMR 1964-1972 GM A-Body Rear Coilover Conversion Kit - Red
Couldn't load pickup availability
Increase traction and add ride height adjustability to the rear of your 1964-1972 GM A-Body with a Coil-Over Conversion Kit from BMR Suspension. OE-style lowering springs can drop the vehicle, but do so at the expense of suspension and shock travel. By utilizing a conventional coil-over, the vehicle can ride at a lower ride height, while still retaining full suspension travel. BMR manufactures its Coil-Over Conversion Kits from CNC-laser cut, CNC-formed 1/4-inch steel plate for strength, lightweight, and precise fitment. These also give you five mounting positions for the lower control arm. This allows for easy instant center and anti-squat changes, so you can fine-tune the car's rear suspension geometry. Whether you want to aggressively lower your A-body or you want the added suspension control you get with coil-overs, BMR makes it easy to add coil-overs to the rear of your car.
Designed for street performance, drag race, and handling applications, BMR makes its coil-over brackets from strong 1/4-inch laser-cut steel plate. These plates simply bolt in place and allow for commonly available coil-over shocks to bolt in. This kit is designed to work with any coil-over with a 1.25-inch wide bushing and ½-inch bolt hole. When performance is a must, rely on BMR Suspension!
BMR Suspension's CCK404 Coil Over Conversion Kit is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 2-3 hours. Proudly made in the U.S.A.!
Vehicle Fitment
- 1965-1967 Buick Gran Sport
- 1964-1972 Buick Skylark
- 1964-1972 Chevrolet Chevelle
- 1964-1972 Chevrolet El Camino
- 1970-1972 Chevrolet Monte Carlo
- 1964-1972 Oldsmobile 442
- 1964-1972 Oldsmobile Cutlass
- 1964-1972 Pontiac GTO
- 1964-1972 Pontiac LeMans
Please verify exact fitment for your trim and engine before ordering.
Manufacturer Part Number: CCK404R
Images are for illustrative purposes only. Actual product may vary.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — BMR Suspension
▾
Manufacturer's Warranty — BMR Suspension
BMR Suspension warrants its products to the original purchaser against defects in materials and workmanship under normal use for two (2) years from the date of sale. BMR's obligation under this warranty is limited to replacement of the product — reinstallation and other incidental costs are not covered — and warranty claims are limited to replacement or credit for returned merchandise. The warranty does not apply to products that have been misused, neglected, altered, damaged or improperly installed, and normal wear is not considered a defect. Impact damage and damage to powder coat are specifically excluded. An RMA is required for all warranty returns; replacement product ships at no charge via UPS Ground, and upgraded shipping is available at the customer's expense for the difference in cost. BMR products are designed for use with OEM and other BMR products — BMR does not warrant fitment with aftermarket products from other manufacturers, including suspension, exhaust, drivetrain or other aftermarket components; returns due to fitment issues with OEM or BMR products receive a full refund, while returns due to fitment issues with another manufacturer's aftermarket parts are subject to a 15% restocking fee. BMR also states that racing parts and equipment are used under varied conditions, that the suitability of any part for a particular application is solely the purchaser's decision, and that BMR makes no warranties, express, implied or written, and that there is no warranty of merchantability; BMR reserves the right to change designs without obligation to modify previously manufactured units, and the buyer agrees to indemnify and hold BMR harmless from any claim arising from installation or use. Separately from warranty, non-warranty returns must be made within 90 days of shipment and carry a 15% restocking fee (shipping costs excluded): items that have been installed, used, modified or damaged are not accepted, everything must come back in its original packaging with an RMA and freight prepaid (collect shipments are refused), any scratch or damage is deducted at the cost to repair or re-powder coat, missing components are deducted at replacement cost, and special order items cannot be returned.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by BMR Suspension. Contact us if you need help with a warranty claim.

Q&A
No questions yet. Be the first to ask!