BMR Suspension
BMR 12-15 5th Gen Camaro Street Version Total Suspension Bushing Kit (BK041/BK021/BK022) - Black/Red
BMR 12-15 5th Gen Camaro Street Version Total Suspension Bushing Kit (BK041/BK021/BK022) - Black/Red
Couldn't load pickup availability
Minimize suspension deflection and improve overall handling in your 2012-2013 Camaro with a Total Suspension Bushing Kit from BMR Suspension. Manufactured from low-deflection polyurethane, this kit consists of the street version Rear Cradle Bushing Kit (BK041), Rear Suspension Bushing Kit (BK021), and Front Suspension Bushing Kit (BK022). The BMR Total Suspension Bushing Kit (BK042) minimizes bushing deflection in all front and rear suspension links. Polyurethane is a synthetic polymer that has many properties that make it far superior to OEM rubber bushings. Polyurethane deflects far less that soft rubber, and it doesn't breakdown from exposure to petroleum products, road salt, ozone, and other elements of the harsh undercar environment suspension bushings live in.
Manufactured from low-deflection 95-durometer polyurethane, the BMR rack mount bushing minimizes steering rack movement, helping to maintain consistent toe during aggressive handling. Excessive rack mount bushing deflection can cause toe changes, resulting in erratic and inconsistent handling. BMR's polyurethane rack mount bushing reduces that deflection, allowing for more consistent toe setting. This reduction in deflection also allows for dramatically improved steering response and overall feel, allowing you to be more confident as a driver.
BMR's polyurethane cradle bushing inserts are molded from 95-durometer polyurethane, which reduces bushing deflection by filling the large voids in the factory bushings. This design reduces deflection and improves the overall feel of the car, while still absorbed road noise and engine vibrations. This allows you to increase performance without decreasing comfort.
BMR's polyurethane trailing arm and control arm bushings are molded from low-deflection 95 and 70-durometer polyurethane. This design gives you a dramatic reduction in bushing deflection that greatly improves performance. Tis reduction in deflection considerably lessens wheelhop and increases rear suspension stability, especially in performance driving situations.
BMR's differential bushings are molded from 68-durometer polyurethane, which reduces bushing deflection, while still absorbed road noise and engine vibrations. This drastically increases differential stability over the factory rubber bushings. The polyurethane bushings allow you to increase performance without decreasing comfort.
Designed for street performance applications, BMR Total Suspension Bushing Kits enhance the overall stability of the vehicle by minimizing bushing deflection increasing the performance capabilities of your Camaro. This provides a much more stabilized and predictable platform that permits the suspension to more accurately do its job. The reduction in deflection equates to more stability in the rear suspension and less wheelhop, with more precise steering and less alignment changes during performance driving. All with little to no increase in NVH.
BMR does not recommend this kit for vehicles with more than 450 RWHP. For applications above this power lever, BMR suggests the BK029 Differential Bushing Kit (95 durometer polyurethane) or BK026 Differential Bushing Kit (Delrin) in addition to the BK040.
BMR Suspension's BK041 Differential Bushing Kit is available in red. Installation time is about 6-8 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!
Vehicle Fitment
- 2012-2015 Chevrolet Camaro
Please verify exact fitment for your trim and engine before ordering.
Manufacturer Part Number: BK042
Images are for illustrative purposes only. Actual product may vary.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — BMR Suspension
▾
Manufacturer's Warranty — BMR Suspension
BMR Suspension warrants its products to the original purchaser against defects in materials and workmanship under normal use for two (2) years from the date of sale. BMR's obligation under this warranty is limited to replacement of the product — reinstallation and other incidental costs are not covered — and warranty claims are limited to replacement or credit for returned merchandise. The warranty does not apply to products that have been misused, neglected, altered, damaged or improperly installed, and normal wear is not considered a defect. Impact damage and damage to powder coat are specifically excluded. An RMA is required for all warranty returns; replacement product ships at no charge via UPS Ground, and upgraded shipping is available at the customer's expense for the difference in cost. BMR products are designed for use with OEM and other BMR products — BMR does not warrant fitment with aftermarket products from other manufacturers, including suspension, exhaust, drivetrain or other aftermarket components; returns due to fitment issues with OEM or BMR products receive a full refund, while returns due to fitment issues with another manufacturer's aftermarket parts are subject to a 15% restocking fee. BMR also states that racing parts and equipment are used under varied conditions, that the suitability of any part for a particular application is solely the purchaser's decision, and that BMR makes no warranties, express, implied or written, and that there is no warranty of merchantability; BMR reserves the right to change designs without obligation to modify previously manufactured units, and the buyer agrees to indemnify and hold BMR harmless from any claim arising from installation or use. Separately from warranty, non-warranty returns must be made within 90 days of shipment and carry a 15% restocking fee (shipping costs excluded): items that have been installed, used, modified or damaged are not accepted, everything must come back in its original packaging with an RMA and freight prepaid (collect shipments are refused), any scratch or damage is deducted at the cost to repair or re-powder coat, missing components are deducted at replacement cost, and special order items cannot be returned.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by BMR Suspension. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!