BMR Suspension
BMR 08-23 Challenger Front and Rear Sway Bar End Link Kit - Black
BMR 08-23 Challenger Front and Rear Sway Bar End Link Kit - Black
Couldn't load pickup availability
The amount of force exerted on the sway bar end link is staggering, especially if you've upgraded to an aftermarket sway bar, like BMR Suspension's adjustable and non-adjustable 2008-2017 Dodge Challenger sway bars. The stock end links are weak and can bend or break. BMR's ELK110 front and rear end link kit allows you to push your Challenger to the limit without fear of end link deflection. BMR manufactures the ELK110s out of CNC-machined billet aluminum bar stock. The links are completed with heavy-duty, Teflon-lined rod ends. The rod ends attach to the sway bar with supplied hardware. This combination of components gives you a huge increase in strength over stock end links.
BMR designed the ELK110 front and rear sway bar end link kit for street performance, autocross, and road race applications. BMR's heavy-duty adjustable end links are designed to reduce deflection normally seen with stock sway bar end links. End link deflection means reduced sway bar rate, leaving you with increased body roll and reduced handling ability. BMR's ELK110 will not deflect, giving you the full potential of the sway bar, no matter how hard you drive. The adjustable links give you the ability to easily correct sway bar geometry and working angles on lowered Challengers, as well as cars with adjustable sway bars. The ELK110 adjustable end links give you the ability to preload the sway bar to fine-tune your suspension setup for any track. Combine this with BMR's adjustable sway bars, and you can dial-in your car for the street or any track you may drive on. When performance is a must, rely on BMR Suspension!
BMR Suspension's ELK110 sway bar end links are available in a durable black anodized finish for long-lasting good looks. Installation time is about 2 hour. Proudly made in the U.S.A.!
Vehicle Fitment
- 2008-2023 Dodge Challenger
- 2006-2023 Dodge Charger
Please verify exact fitment for your trim and engine before ordering.
Manufacturer Part Number: ELK110
Images are for illustrative purposes only. Actual product may vary.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — BMR Suspension
▾
Manufacturer's Warranty — BMR Suspension
BMR Suspension warrants its products to the original purchaser against defects in materials and workmanship under normal use for two (2) years from the date of sale. BMR's obligation under this warranty is limited to replacement of the product — reinstallation and other incidental costs are not covered — and warranty claims are limited to replacement or credit for returned merchandise. The warranty does not apply to products that have been misused, neglected, altered, damaged or improperly installed, and normal wear is not considered a defect. Impact damage and damage to powder coat are specifically excluded. An RMA is required for all warranty returns; replacement product ships at no charge via UPS Ground, and upgraded shipping is available at the customer's expense for the difference in cost. BMR products are designed for use with OEM and other BMR products — BMR does not warrant fitment with aftermarket products from other manufacturers, including suspension, exhaust, drivetrain or other aftermarket components; returns due to fitment issues with OEM or BMR products receive a full refund, while returns due to fitment issues with another manufacturer's aftermarket parts are subject to a 15% restocking fee. BMR also states that racing parts and equipment are used under varied conditions, that the suitability of any part for a particular application is solely the purchaser's decision, and that BMR makes no warranties, express, implied or written, and that there is no warranty of merchantability; BMR reserves the right to change designs without obligation to modify previously manufactured units, and the buyer agrees to indemnify and hold BMR harmless from any claim arising from installation or use. Separately from warranty, non-warranty returns must be made within 90 days of shipment and carry a 15% restocking fee (shipping costs excluded): items that have been installed, used, modified or damaged are not accepted, everything must come back in its original packaging with an RMA and freight prepaid (collect shipments are refused), any scratch or damage is deducted at the cost to repair or re-powder coat, missing components are deducted at replacement cost, and special order items cannot be returned.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by BMR Suspension. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!