BMR Suspension
BMR 04-07 CTS-V Pinion Support Brace - Red
BMR 04-07 CTS-V Pinion Support Brace - Red
Couldn't load pickup availability
Increase U-joint life, launch consistency, and overall driveline efficiency with a pinion support brace from BMR Suspension. The factory first gen CTS-V front differential bushings controls pinion movement, but the soft factory rubber bushing allows for excessive pinion rise. This can lead to shortened U-joint life, as well as unwanted NVH. BMR's Pinion Support Brace (PSB001) greatly reduces pinion rise, giving you a much more stable feel. The pinion support brace uses a 95-durometer polyurethane to limit pinion movement. This eliminates the "spongy"ย feeling you get when power is applied to the chassis. This also increases throttle response as the differential bushing deflection is dramatically reduced.
BMR designed the PSB001 for street performance, drag race, and handling applications. The polyurethane bushings reduces deflection and pinion rise, giving you a much more responsive feel. When simply releasing the clutch at idle with the brake on, the stock, unsupported pinion measures up to two degrees of deflection. Aggressive driving loads this bushing significantly more allowing up to four degrees of pinion deflection before the OE bushing bottoms out. The pinion support brace reduces the power wasted, getting more power to the ground. When performance is a must, rely on BMR Suspension!
BMR Suspension PSB001 Pinion Support Brace is available in black hammertone or red powdercoat. Installation time is about 1 hour. Proudly made in the U.S.A.
Vehicle Fitment
- 2004-2007 Cadillac CTS
Please verify exact fitment for your trim and engine before ordering.
Manufacturer Part Number: PSB001R
Images are for illustrative purposes only. Actual product may vary.
โ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
๐ก๏ธ
Manufacturer's Warranty โ BMR Suspension
โพ
Manufacturer's Warranty โ BMR Suspension
BMR Suspension warrants its products to the original purchaser against defects in materials and workmanship under normal use for two (2) years from the date of sale. BMR's obligation under this warranty is limited to replacement of the product — reinstallation and other incidental costs are not covered — and warranty claims are limited to replacement or credit for returned merchandise. The warranty does not apply to products that have been misused, neglected, altered, damaged or improperly installed, and normal wear is not considered a defect. Impact damage and damage to powder coat are specifically excluded. An RMA is required for all warranty returns; replacement product ships at no charge via UPS Ground, and upgraded shipping is available at the customer's expense for the difference in cost. BMR products are designed for use with OEM and other BMR products — BMR does not warrant fitment with aftermarket products from other manufacturers, including suspension, exhaust, drivetrain or other aftermarket components; returns due to fitment issues with OEM or BMR products receive a full refund, while returns due to fitment issues with another manufacturer's aftermarket parts are subject to a 15% restocking fee. BMR also states that racing parts and equipment are used under varied conditions, that the suitability of any part for a particular application is solely the purchaser's decision, and that BMR makes no warranties, express, implied or written, and that there is no warranty of merchantability; BMR reserves the right to change designs without obligation to modify previously manufactured units, and the buyer agrees to indemnify and hold BMR harmless from any claim arising from installation or use. Separately from warranty, non-warranty returns must be made within 90 days of shipment and carry a 15% restocking fee (shipping costs excluded): items that have been installed, used, modified or damaged are not accepted, everything must come back in its original packaging with an RMA and freight prepaid (collect shipments are refused), any scratch or damage is deducted at the cost to repair or re-powder coat, missing components are deducted at replacement cost, and special order items cannot be returned.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by BMR Suspension. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!