Bilstein
Bilstein 18-23 Jeep Wrangler JL 4DR B8 5100 1.5in Suspension Lift Kit (With Winch)
Bilstein 18-23 Jeep Wrangler JL 4DR B8 5100 1.5in Suspension Lift Kit (With Winch)
Couldn't load pickup availability
Bilstein B8 5100 Lift Kit is a high performance lift kit which provides more ground clearance, allows for larger tires, and increases wheel travel & articulation on all four corners of a solid axle Jeep Wrangler JL. The Bilstein B8 5100 Lift Kit consists of (4) B8 5100 shock absorbers combined with (4) custom matched, longer travel, cold wound coil springs and all necessary supporting components and hardware. This simple yet effective kit will bolt into the factory locations and allows Wrangler JL Rubicons to run 35" tires and non-Rubicon models with stock fenders to run 33" tires. This kit optimizes the JL suspension, as delivered from the factory, and does not require additional components to correct suspension geometry which other lift kits often require. The Bilstein B8 5100 Lift Kit provides the full benefit of taller tires without an unsightly excessive wheel gap and provides a smooth and stable ride both on and off-road.
Vehicle Fitment
- 2018-2019 Jeep Wrangler
- 2018-2021 Jeep Wrangler
- 2018-2022 Jeep Wrangler
- 2021-2021 Jeep Wrangler
- 2021-2022 Jeep Wrangler
- 2023-2023 Jeep Wrangler
Please verify exact fitment for your trim and engine before ordering.
Manufacturer Part Number: 53-291431
Images are for illustrative purposes only. Actual product may vary.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — Bilstein
▾
Manufacturer's Warranty — Bilstein
BILSTEIN (thyssenkrupp Bilstein of America) warrants its North American aftermarket products to the original retail purchaser against defects in material and workmanship. Coverage is tiered by product line: a Limited Lifetime Warranty — for as long as the original purchaser owns the vehicle it was installed on — applies to B4 OE Replacement, B6, B6 Performance, B6 4600, B8 Performance Plus, B8 5100 (including Ride Height Adjustable), B8 5112, B8 6112, B12, B14 (PSS) and B16 (PSS9 & PSS10). B4 OE Replacement (Air) air-suspension struts and steering racks carry a Limited 2-Year Warranty under the same terms, and motorsports products are covered separately, with the overall range running from 90 days to lifetime. The warranty is non-transferable and proof of purchase from an authorized BILSTEIN distributor is required. BILSTEIN's liability is limited to repair or replacement with a new or reconditioned unit; installation labor and consequential damages are excluded. Not covered: normal wear and tear, including dust boots and mounting hardware such as rubber bushings, ball joints and heim joints; improper installation or removal (impact tools, incorrect fastener torque); incorrect application — product fitted to a vehicle not listed in the BILSTEIN application catalog; severe environmental conditions and road-hazard impact damage; and racing or competition driving, on- or off-road. If your vehicle came with BILSTEIN dampers from the factory (original equipment), the claim goes to the vehicle manufacturer, not BILSTEIN. Because BILSTEIN processes claims through the place of purchase, if you bought it here, contact PitStopTuning and we'll obtain the Warranty Evaluation Form and file the claim with BILSTEIN for you rather than approaching BILSTEIN directly.
Warranty terms are set by the manufacturer and may change. Contact us if you need help with a warranty claim.

Q&A
No questions yet. Be the first to ask!