Baer Brakes
Baer Brakes 73-77 GM A- Body/70-81 F-Body 13in Classic Series Front Brake Kit - Red
Baer Brakes 73-77 GM A- Body/70-81 F-Body 13in Classic Series Front Brake Kit - Red
Couldn't load pickup availability
This system features the "Original" Baer 2-piston, pad guided caliper (PGC) mounted to a 13", 1-piece slot, drill, zinc plated integral hub rotor. The PGC caliper comes in a red powder coated finish with a black logo, includes dust/weather seal's and uses the popular D412 pad type. The system includes spindles (not installed), premium bearings with races pre-installed, dust caps, mounting brackets, stainless braided hoses and all necessary hardware making for an easy assembly. The 13" "Classic" system fits most 17" or larger wheels. || **IMPORTANT: This system is designed for vehicles with a 15/16” master cylinder and proper pedal ratio. For manual brake setups, a 7/8” master cylinder can be used so less effort is required to apply the brakes. Any master larger than 15/16” will require too much pedal input to generate proper line pressure for your brake system.**
- Modern Brakes for Small Wheels at an Economical Price
- Red Powder Coated Caliper w/Black Baer Logo
- Aluminum, 2-Piston, Pad Guided Caliper
- Slot, Drill, Zinc Plated Rotor Finish
- Uses Common FMSI D0412 Brake Pad
- Stainless Braided Brake Hoses
Vehicle Fitment
- 1973-1976 Buick Century
- 1973-1976 Buick Regal
- 1971-1976 Buick Skylark
- 1970-1981 Chevrolet Camaro
- 1973-1973 Chevrolet Chevelle
- 1971-1976 Chevrolet El Camino
- 1975-1975 Chevrolet Malibu
- 1971-1976 Chevrolet Monte Carlo
- 1971-1976 Oldsmobile Cutlass
- 1975-1979 Oldsmobile Omega
- 1970-1981 Pontiac Firebird
- 1973-1973 Pontiac GTO
- 1975-1977 Pontiac Ventura
Please verify exact fitment for your trim and engine before ordering.
🚚 Vendor Direct Shipment: This item is not stocked in our warehouse and ships directly from the manufacturer. Please allow additional handling time before dispatch.
Manufacturer Part Number: 4301676R
Images are for illustrative purposes only. Actual product may vary.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — Baer Brakes
▾
Manufacturer's Warranty — Baer Brakes
Baer covers its products against manufacturing defects in material and workmanship for one (1) year from the date of purchase. Coverage is limited to repair or replacement of the defective part. Damage from abuse, misuse, improper installation, accident, or racing use is not covered, and normal wear items are excluded. Cosmetic finishes — including powder coating and plating — are not covered. Complete brake systems are built to order and are not returnable; nonstandard finishes are likewise not returnable. Claims must be initiated through the original place of purchase.
Warranty terms are set by the manufacturer and may change. Contact us if you need help with a warranty claim.

Q&A
No questions yet. Be the first to ask!