AEM
AEM X-Series 0-150 Oil Pressure Gauge Kit
AEM X-Series 0-150 Oil Pressure Gauge Kit
Couldn't load pickup availability
AEM's 30-0307 X-Series 150 PSI/10 BAR Digital Oil Pressure gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate oil or fuel pressure readouts in their high performance vehicle. NOTE: The 30-0307 comes with a black bezel and black oil pressure faceplate. You will need to purchase the optional 30-0307-ACC accessory kit to get the silver bezel and white oil pressure faceplate. Each faceplate is double sided with standard PSI on one side and metric BAR on the other. The calibration for standard or metric display is easily performed using the buttons on the face of the gauge.
EASIER TO READ
Visual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED "needle" lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.
EASIER TO MOUNT
Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825", with a cup depth of only 0.200." This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.
SMARTER INTERFACE
X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.
Features
- 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods
- Slim 0.825" overall gauge depth and 0.200" cup depth - mount them virtually anywhere!
- Programmable center LED is 87% larger than original AEM gauges
- 24 green outer LEDs for quick reference to engine parameter
- User selectable standard or metric display (0-100 PSI/0-7 BAR)
- Peak/Recall via gauge face buttons
- User selectable threshold warnings
- Optional silver bezel and white faceplate accessory kit available (sold separately)
- AEMnet CANbus-enabled for transmitting data to EMS or Data Logger
- 0-5v analog outputs for transmitting data to EMS or Data Logger
- Auto dimming sensor delivers ideal display brightness
- Positive locking connectors provide secure connection
Application: Universal — verify fitment for your setup. This is a performance/fabrication component not tied to a specific vehicle year/make/model.
Manufacturer Part Number: 30-0307
Images are for illustrative purposes only. Actual product may vary.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — AEM
▾
Manufacturer's Warranty — AEM
AEM Performance Electronics warrants to the original consumer that its products will be free from defects in material and workmanship under normal and proper use for 90 days from the date of the original purchase. Coverage runs to the original purchaser only and is non-transferable, and in no event does it exceed the original purchase price of the product. If a product fails because of a covered defect within that period, AEM will repair or replace it at no cost to the customer — that repair or replacement is the sole and exclusive remedy. Not covered: normal wear and tear and required maintenance; improper handling, storage, installation, lubrication or maintenance; misuse, abuse, unauthorized modification or alteration, incorrect polarity (+ and - wires crossed), accident, acts of God, or other external causes; and cosmetic damage such as nicks, bruising and discoloration. A warranty return is only accepted with a valid Return Merchandise Authorization (RMA) number and a dated proof of purchase — and AEM requires the installer or end-user to contact its technical support team before an RMA can be issued. Do not return a product or request an RMA before that contact is made; most issues are resolved over the phone, and the call is what lets AEM track the product through the warranty process. Outside the warranty period, most AEM products — discontinued items excepted — can be replaced at a discounted rate once the faulted unit is documented as field destroyed, and an RMA must be issued before that replacement transaction can happen.
Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by AEM. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!