ICON
2019+ RAM 1500 2-3in. Stage 1 Suspension System W/ Tubular Upper Control Arms
2019+ RAM 1500 2-3in. Stage 1 Suspension System W/ Tubular Upper Control Arms
Couldn't load pickup availability
ICON Vehicle Dynamics 2019-2023 Ram 1500 suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. This Stage 1 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers, are also height adjustable for 2-3” of front lift over stock, allowing the use of larger, more aggressive wheel and tire combinations and their longer than stock length improves performance by increasing front wheel travel. Tubular Delta Joint upper control arms not only add strength and durability, but help retain factory alignment specs, increasing caster over stock and allow proper wheel alignment at the lift height this system provides. ICON 2.0 A
Vehicle Fitment
- 2019-2026 Ram 1500
Please verify exact fitment for your trim and engine before ordering.
Manufacturer Part Number: K213111T
Images are for illustrative purposes only. Actual product may vary.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — ICON
▾
Manufacturer's Warranty — ICON
ICON Vehicle Dynamics sets warranty by product line. Shock absorbers carry a 1-year warranty against manufacturer defects: a shock that fails within that first year of ownership must be shipped to ICON for inspection and service, and if inspection shows the failure came from neglect, damage caused by improper installation, or any reason other than normal wear and tear, the owner is responsible for all service costs including labor, parts and shipping. ICON's other components are covered by a limited lifetime warranty. Two joint products have their own terms: the ICON Delta Joint carries a five-year warranty and a defective joint is replaced only if the warranty registration was completed within 30 days of purchase (iconvehicledynamics.com/deltajointreg), while the Delta Joint Pro carries one year from the date of purchase — neither applies to a joint used with a non-ICON suspension system, and an unregistered Delta Joint is not covered. Coverage runs to the original retail purchaser who owns the vehicle the product was originally installed on and is not transferable. ICON's obligation is limited to repair or replacement at its discretion; removal, installation or re-installation, freight charges and incidental or consequential damages are expressly excluded, and items subject to wear are not considered defective when worn. Components must be installed as a complete kit as shown in ICON's current application guide — any substitution or omission of required components voids the warranty immediately. Also not covered: finish, alterations, modifications, installation contrary to ICON's instructions, finish damage that occurs during shipping, race or competition use, and police, taxi, government or commercial vehicles. Sales outside the United States and Canada are excluded.
Warranty terms are set by the manufacturer and may change. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!